Australia

Home/Australia

Alcoa LTD

Alcoa LTD is a worldwide producer of, among others, aluminium. One of the places where they produce aluminium is Point Henry in Australia. Because this production takes up a lot of energy, they produce it themselves in a power plant running on coal in Anglesea, Australia. ZINGA has been used on water trays that are placed at the inside of cooling towers. This application took place in Anglesea.

General contractor:   Powercor – Randall Long
Paint Inspection office:  Incospec – Peter Dove
Applicator:  Temco (towers), Hydro-blast (trays)
Principals:  Alcoa ltd – David Le Lièvre and Ross Vince

 

ZINGA has also been used on power pylons at Point Henry, Australia. Here it was applied on top of an old hot-dip layer. The application took place between 8 and 15 April 2005. After an inspection in November 2006, the treated towers were still in perfect condition.

 

 

Burdekin Bridge

The Burdekin Bridge (known as the Silver Link) spans the Burdekin River between the towns of Ayr and Home Hill, Queensland, Australia. Located on the Bruce Highway which is part of Highway 1, it is an important link in the national road network.
It is a road-rail bridge which provides high flood immunity link between north and south Queensland. The Bridge was completed in 1957. Construction began 10 years earlier in 1947. 1103 meters in length, it is one of the longest multi-span bridges in Australia.

ZINGA has been used since 2005 for patch repair. During 2010/2011 the under road areas of the 22 approach spans have been coated with ZINGA.

In the beginning of 2013, the road support structures were coated with ZINGA specified as a class Sa2½ abrasive blast clean followed by 2 coats of ZINGA to an average dry film thickness of 180 μm. The coating system for the rail support structure required a decorative silver finish, and the coating system was therefore as described but incorporated a coat of AluZm. A dry film thickness of 40 μm was specified.